Gas generator sets of gas requirements, the following Xiaobian for you to explain:
In the gas intake valve 1m
The gas temperature are less than 40;
The gas pressure 3~20kpa, pressure change rate is less than 1kpa/min;
H2S = 200mg/Nm3;
The gas volume content of CH4 is less than or equal to 30%, CH4 and O2 and the content of the 28% volume, the volume content of O2 is greater than or equal to 16%;
The gas moisture content is less than 40g/Nm3;
The impurity particle size less than or equal to 5 m, the impurity content is less than 30mg/Nm3;
Note: if the high content of sulfur and ammonia gas, not only serious corrosion of spark plug electrodes, and the acid value of oil increased, corrosion unit internal parts, also easy to produce precipitate, increase of engine wear and corrosion. Suitable for high and low gas concentration. For low concentration gas transport, water mist delivery systems or related facilities are considered for safety reasons.
The above is about the knowledge of gas generating units, I believe you have a relatively deep understanding of our products, if there are any problems do not understand, welcome to inquire, we sincerely welcome your presence.