The gas generator set is reliable, stable and has good speed regulation ability. It is equipped with high and low speed switch and speed trimming potentiometer. The high and low speed switch mainly carries on the low speed control and the calibration speed control switch, the gas generator set external speed Trimming Potentiometer can finely adjust the deviation.
If the cooling water enters the oil engine, the oil level of the oil pan of the gas generator set will be increased, the oil will be yellow foam, and the surface of the filter cartridge can be condensed with water vapor.
1, check the gas supply pressure, open the gas supply valve, check the pressure tank on the pressure indicator is normal, otherwise it should be adjusted to normal value.
2. Check the oil level in the oil pan. The oil level should be marked on the oil dipstick. When it is insufficient, it should be added to the required quantity.
3, check the three leakage (water, gas, oil) situation, to eliminate oil, water pipes, road joints, such as the sealing surface of the oil leakage, leakage phenomenon; to eliminate gas pipeline joints, and into the exhaust pipe, cylinder head gasket at the leak phenomenon.
4. Check the installation of the engine accessories, including the stability of each attachment installation, the reliability of the connection between the foundation screw and the working machinery.
5, check the instrument, observe the reading is normal, otherwise should be repaired or replaced in time
6, clean engine and ancillary equipment appearance, with a dry cloth wipe body, cylinder cover, air filter on the surface of the oil, water and dust Ze; wipe or with compressed air blowing charging generator and radiator, fan on the surface of the dust.
This article from the gas generating unit friendship dedication, more relevant knowledge, please click: , we will use the most advanced technology, the most sincere attitude, to provide you with the most comprehensive services. We will continue to dedicate to you, please look forward to.